&

Power：3.7V Lithium battery(500mAh)

Charging: Mirco USB charing (5V/500-1000mAh)

Size： 41x41x79mm

Working way： Sensing on/off with dual sensors

Size of connecter： Male M24*1 or Female M22*1

Water output way： Soft water

Sensing distance： Side:1-6cm ,Bottom:1-10cm(Hand detection)

Waterproof： IP56

GIBO Dual sensors kitchen sensor faucet aerator

This is a DIY faucet aerator to change manual kitchen faucet to be automatic. Users just need to install this sensor device to the current kitchen faucet to make it as sensor faucet. There are two different sizes mounting connectors:Male M24*1 and Female M22*1, this device will match most kinds of kitchen faucet.

1) Side Sensor----This is wave-on sensor. Function: Hands wave once, water automatically flows while hands wave again water automatically stops. Security stops 3min.

2) Bottom Sensor----This is automatic sensor. Function: Hands in sensor range, water automatically flows while hands out of sensor range, water automatically stops. Security stops 1mins.

3) Time Limit: Washing time is set for 3 mins for both sensors. It means the sensor will automatically stop water flow if water continously flows for 3mins.

4) Low power indication: Sensor LED continously flash 5 times to indicate low power. This may indicate it is time to replace existing batteries with new ones or there is not enough power going to unit.

5) Water saving: Water efficient faucet reduces overall water usage without sacrificing water pressure.

6) Energy saving: Li battery could work more than 9 months for each recharging.

潔博利感應水龍頭